Modular Housing & Accommodation Units

Structure

The frames are made of galvanized pre-painted steel RAL 9002 (Thickness 1,5
mm), from galvanized coils (standard: UNI 5753-75);

Base

The base frame is made of galvanized pre-painted steel RAL 9002 (Thickness
1,5 mm); with a galvanized steel sheet (thickness 0,6 mm). Over the slab, a
18mm thick wood panel and an overlay PVC floor 2mm thick (waterproof).

Walls and Partitions

PUR insulated sandwich panels (thickness 30 mm), supporting steel structure
thickness 0,4 mm according to UNI EN 10169, with PUR insulation D=38-40 Kg/
mc Transmittance U=0,55 W/mqK.

Roof

PUR insulated sandwich panels (thickness 30 or 40 mm*), Supporting steel
structure thickness 0,4 mm according to UNI EN 10169, with PUR insulation
D=38-40 Kg/mc. Upon which, a corrugated galvanized steel sheet h=55 mm
is laid.

Doors, Windows and Fixtures

Aluminium frame (white RAL 9010) complete of hardware and all use accessories.
Glazing (thickness 4 mm), protection bars, handles and locks.
– Standard door dim. 1.050xh2.100 mm ( 890xh2.060 mm);
– Double sliding window dim. 1.050xh1.100 mm
– hopper Window dim. 6500×450 mm*
Other windows and fixtures* (uPVC; Timber-Aluminium Clad)
Note: Liftable with a crane, 4 points lifting eyes.
Water draining system on both the short sides.

Electrical System*

Standard: Earth, and circuit breaker.

Plumbing*

Made with exposed piping. Floor or Wall Drain. All independent. The customer
will link them together and convey them.